Filter
Top Products
3. Push in the
SET
button at the end of
4.
Take your foot
off
the accelerator
the lever and release it.
pedal.
I
I
To
Resume
a
Set Speed
Suppose you set your cruise control at a
desired speed and then you apply the
brake or clutch pedal. This, of course,
shuts
off
the cruise control. But you
don’t need to reset it. Once you’re going
about
25
mph
(40
kwh) or more, you
can move the cruise control switch from
ON
to
R/A
(which stands for Resume/
Accelerate) for about half a second.
You’ll go right back up to your chosen
speed and stay there.
If you hold the switch
at
R/A
longer
than half a second, the vehicle
will
keep
going faster until you release the switch
or apply the brake or clutch pedal. You
could be startled and even lose control.
So
unless you want to go faster, don’t
hold the switch at
R/A.
To
Increase speed While
Using
Cruise Control
There are two ways
to
go
to
a higher
speed. Here’s the first:
1.
Use the accelerator pedal to get to
the higher speed.
2.
Push the button
at
the end
of
the
lever, then release the button and the
accelerator pedal. You’ll now cruise
at the higher speed.
Here’s the second way
to
go
to a higher
speed:
Move the cruise switch from
ON
to
R/A.
Hold it there until you get up to
the speed you want, and then release
the switch.
To
increase your speed in very small
amounts, move the switch to
R/A
for
less than half a second and then
release it. Each time you do this, your
vehicle will go about
1
mph
(1.6
km/h)
faster.