Filter
Top Products
56
Illustration A
We recommend folding the basic unit slightly for the next step, so as to slacken off the fabric cover.
Now lay both the straps that are
at the top end of the baby seat
around the top crossbar inside
the trailer.
We recommend not pulling the
straps too tight, otherwise once
you fold the unit out again the
baby seat will be under too
much tension.
Finally pull all fastening straps tight. (Once you have opened out the trailer body again.)
If you want to adjust the seat to a flatter position, loosen both of the top fastening straps and pull the
other four straps tight. If you want an adjustment of greater incline, the procedure is the same but reversed.
Fully fitted baby seat.
Please note: Make sure you check all belt buckles are tight.
Please note:
Never transport your
children without the safety
belts being properly and
fully adjusted, otherwise
your child could be
seriously or even fatally injured
in the event of an accident!
Thread the end of the strap as
shown in the above illustration
through the fastener in the baby
seat and gently pull the strap
tight.