Chariot Carriers Chariot Baby Seat Baby Carrier User Manual


 
2. Fitting to Two Seater Chariot Trailers
2.1.1 Fitting the Telescopic Tube
The telescopic tube is secured at the front to the side frame tubes.
In the forward side frame tubes
there are holes with threaded
bushes for fitting the telescopic
tube.
There are already screws
inserted in the threaded bushes
for securing the telescopic tube
to the Chariot CTS two seaters.
Please use only these
screws –
the screws which you might
find supplied with the baby
seats are no longer required
and do not fit.
Please note: These are
imperial thread size screws
(in inches), so standard
metric thread screws are not
suitable as replacements.
Locate the aluminium profile
of the telescopic tube behind
the side tube of the basic unit
(in other words to the inside,
facing the passenger
compartment) and align the
holes of the frame tube and
aluminium profile.
Make sure that you insert the
screw exactly perpendicular
to the frame tube so that it
properly engages the threa-
ded bush.
Screw in using a suitable scre-
wdriver, but do not tighten.
Then screw in the screw on the
other side. Only then should
you tighten both screws.
42
2.1 Preliminary steps
1. Undoing the Baby Seat Securing Straps
On delivery, the four baby seat securing straps are threaded through the relevant fasteners. When secu-
ring the seat they have to be pulled out of the fasteners.
Securing strap threaded through To pull out Final position