Filter
Top Products
55
The next step is to connect the safety belts in the trailer with the baby seat:
Insert the trailer seat crotch
harness from the rear through
the slot in the baby seat in front
of the flap for the padding.
Then insert the fastnex insert
through the elastic loop at the
end of the flap for the padding.
Insert the fastex buckles from
the front through the lower or
upper slots in the baby seat,
depending on the size of the
child,…
...and reconnect both buckles
behind the seat. The two fastex
buckles on the backrest should
be in the lowest position.
Loosen the fastex buckles on the padded shoulder harness on the backrest of the trailer seat and
take it off.
The shoulder harness and
crotch straps can now be
connected by closing the fastex
fastener on the front of the
baby seat.
The shoulder padding can be
turned over at the top so that
the shoulder strap can be
sufficiently shortened.
If necessary, the lower con-
necting strap of the shoulder
padding can also be
unstrapped and the shoulder
padding turned over there as
well.
For all other children, the
shoulder strap can be drawn
through the upper flaps of the
padding to prevent the padding
being able to slip to the side.