Filter
Top Products
41
Fitting Instructions Chariot Baby Seat
Congratulations on buying the Chariot Baby Seat, which can be
permanently fitted to all Chariot trailer models from 2003 onwards.
Safety note!
The Chariot Baby Seat is suitable for carrying babies aged between one and ten months of age safely.
The baby may not exceed 75cm in length. The maximum weight of the child should not exceed 10kg.
All trailers that are suitable can be folded with the baby seat fitted in situ.
Parts supplied:
Baby seat, telescopic tube,
bungee cord
2 countersunk bolts with
nylok nuts, 2 machine bolts
with nylok nuts, 2 D rings
Note:
When fitting the baby seat to
post-2006 Chariot models,
the enclosed screws are not
needed. In this instance they
are also unsuitable for use as
replacement screws.
The screw set is only needed
for 2003 - 2005 Chariot models.
These fitting instructions relate only to fitting to Chariot trailer models from 2006 onwards.
You can find the fitting instructions for 2003 - 2005 Chariot models on our website
“www.zweipluszwei.com”.
Note:
When fitting the baby seat to a two seater trailer, the telescopic tube is required, but for a single
seater trailer the D-rings should be used.
Note:
The baby seat is only approved for Chariot CTS models from the 2003 model onwards.
These models have the following distinguishing features:
- Drilled holes on the front undersides of the upper side frame tubes, which as from the 2006 model
also have threaded bushes
- All lap belts have adjustable length
- Lap belts securely attached to the frame
The baby seat is not designed to be fitted to older models.
The bungee cord is only
needed for the Corsaire XL and
Captain XL models.
Note: The Caddie model is not a CTS model.
Please note: We reserve the right to make changings relating to pro-
duction.
If in doubt ask your specialist dealer.