Chariot Carriers Chariot Baby Seat Baby Carrier User Manual


 
54
Finally pull all fastening straps tight. (Once you have opened out the trailer body again.)
If you want to adjust the seat to a flatter position, loosen both of the top fastening straps and pull the
other four straps tight. If you want an adjustment of greater incline, the procedure is the same but reversed.
3.2.2 Securing on the CX1 and Cougar1 models
Illustration A
Fully fitted baby seat.
Please note: Make sure you check all belt buckles are tight.
Please note:
Never transport your
children without the safety
belts being properly and
fully adjusted, otherwise
your child could be
seriously or even fatally injured
in the event of an accident!
First connect the fastex buckles
on the underside of the baby
seat with their counterparts on
the lap belt ends.
Correct positioning of the baby
seat.
Experience has shown that it
helps if an overall belt length
adjustment of more or less
15 to 16 cm is made
(measured from the point of
attachment to the baby seat to
the point of attachment to the
trailer seat).
First pull one of the two straps
at the front end of the baby
seat through the corresponding
D-ring.
Fit the second strap in exactly
the same fashion. Now pull
both straps tight so that the
baby seat is positioned cen-
trally.
Thread the end of the strap as
shown in the above illustration
through the fastener in the baby
seat and gently pull the strap
tight.