Filter
Top Products
4.0 KEY DESCRIPTIONS
[Zero] or
Sets the zero point for all subsequent weighing. The
display shows zero.
A secondary function is of "Enter" key used when
setting up the value for the Parameters.
[Tare] or
Tares the scale. Stores the weight currently on the
scale as tare value, subtracts the tare value from the
gross weight and shows the results.
A secondary function is of incrementing the active
digit when setting a value for Parameters.
[Pcs]
Selects parts counting. Used to set the sample
quantities while parts counting.
A secondary function is to move the active/flashing
digit to the left when setting values for the
Parameters.
[Unit] or [U]
Selects the weighing unit to be displayed from those
which are enabled. See parameter F2 in section 7.
@Adam Equipment Company 2006
8