A SERVICE OF

logo

Troubleshooting
6-6
1. With the power on, locate the battery compartment at the bottom of the
PARTNER Endeavor processor module, below the extension jacks (see
Figure 6-1). Push gently on the battery icon (the locking latch) and slide
the battery icon up to cover the “plus” icon.
Figure 6-1. Battery Compartment PARTNER Endeavor processor module
2. Remove the battery assembly by gently pulling the tab at the bottom of the
battery compartment cover (see Figure 6-2)
.
Figure 6-2. Removing the Battery Assembly
Battery
Compartment
Locking
Latch
Unlocked PositionLocked Position
Tab