A SERVICE OF

logo

Feature Reference
5-204
All of the system and telephone programming settings that were in effect
before the power failure or down period are retained (except those
mentioned in the “Related Features” section above); they do not revert to
the default settings.
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To reset the system, press
f 0 0 s s # 7 2 8
at extension 10 or 11. The following appears on the display:
Reset-Save All
When the reset is completed, the system is no longer in Programming Mode and
the date and time appear on the display.