A SERVICE OF

logo

Open as PDF
next previous
Feature Reference
5-214
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To change the number of times a transferred call rings before returning to the
transfer return extension:
1. Press
f 0 0 s s # 1 0 5 at extension
10 or 11.
2. Enter a setting (0–9). For example, to set a Transfer Return of 5 rings,
press
D until the following appears on the display:
Transfer Return
5 Rings
3. Select another procedure or exit programming mode.