Feature Reference
5-84
— For touch-tone phones
— For rotary phones
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To create a list of Disallowed Phone Numbers:
1. Press
f 0 0 s s # 4 0 4 at extension
10 or 11.
2. At the
List No:
prompt, enter a list number (1–8). For example, to select
the first list, press
1.
3. At the
Entry:
prompt, select a list entry (01–10).
4. At the
Data- - - - - - - - - - - -
prompt, enter the first telephone
number.
5. To save the telephone number in memory, you must press
e.
6. At this point:
■ To add other phone numbers to this list, press n to select a
different list entry and repeat Steps 4 and 5.
■ To change the phone number you just entered, press r and
repeat Steps 4 and 5.
■ To delete the phone number you just entered, press r.
■ To create another list, press N or P and repeat
from Step 2.
7. Select another procedure using
N or P or exit
programming mode.
*67 Prevents use of *67 to block Caller ID information
1167 Prevents use of 1167 to block Caller ID information
