Rev 2.00 52 Document 900.0399
03/06
Record Menu
Click Record on the left-hand panel of the Setup menu. In the Record menu (see
Figure 7-6) you can set the recording conditions for Always, Event, or Auto recording. You
can also select to record individual channels or All the channels.
Note Live video will only be recorded to the local PC while the Viewer software is
connected to the remote digital video recorder and in Live view mode. Video
will be recorded based on the settings in the table below.
Figure 7-6 Record Menu
Table 7-1 Record Menu Settings
Setting Operation
Autorecord When a user connects remotely, the Local Rec button will automatically be
enabled (RED) and video will be recorded to the local PC hard disk based on
settings in this Record menu.
Always When checked and the Local Rec button is enabled (RED) in live monitoring
live video will be recorded to the local PC hard disk for channels enabled.
Event When checked and the Local Rec button is enabled (RED), Live motion or
alarm events will be recorded tot he local PC hard disk.
Motion Will record live motion events for the channels enabled, when checked.
Alarm Will record live alarm events for the channels enabled, when checked.
Duration Will record this duration of post-event video, when checked.
Channel Will record enabled channels.
