Rev 2.00 17 Document 900.0399
03/06
Figure 3-5 Motion Zone Setup Screen
Note Only selected zones will trigger motion recording.
Recording Schedules
To set up a recording schedule, select SCHEDULE in the RECORD menu.
Use the arrow buttons to navigate through the items and set the recording schedule.
Figure 3-6 Recording Schedule Setup Screen
You can schedule recording in one hour increments from 0 to 24 (0:00 to 24:00). You can
select individual blocks of time, blocks of time for all channels, entire channels, or the entire
schedule. Motion recording, sensor recording and continuous recording can be used
exclusively for the schedule, or mixed as needed. See Table 3-5 for four ways to set the
schedule.
To set up a recording schedule, select SCHEDULE in the record menu. Use the arrow
buttons to select one of the items in Table 3-5. Then press SEL to toggle and select the
recording method required (C = Continuous, M = Motion, S = Sensor, - = No recording).
Selected
zones
