Operation, cont’d
ISS 506 Integration Seamless Switcher • Operation
3-28
The selected preview and program inputs, the picture adjustments, and other
current settings are saved in nonvolatile memory. When power is applied, the
latest configuration is retrieved.
N
The ISS requires some time to save any new settings. Wait at least 5 minutes
before removing power from the switcher or the settings may be lost.
2
sec.
2
sec.
2
sec.
Default Display Cycle
10
sec.
Extron
ISS 506 Vn.nn
2
sec.
Integration
SeamlessSwitcher
Prog #1 RGB
48.4kHz 60Hz 15.7kHz 59.9Hz
Prev #3 S-Vid
Output Rate
1024x768 @60Hz
Power
on
Initializing
Please Wait...
Figure 3-19 — LCD power up and default display cycle
Selecting an input to be the program output
To select an input to scale and display as the program output, press and release the
desired program input button. The selected input button lights green.
N
Input selections can be made with the audio broken away under RS-232/RS-422
or Ethernet control only. See chapter 4, “SIS
Programming and Control“;
chapter 5, “Switcher Software“; and chapter 6, “HTML Operation“.
The input button lights green when video only is selected.
The input button lights red when audio only is selected.
N
Video and audio outputs can be muted under RS-232/RS-422 or Ethernet
control only. See chapter 4, “SIS
Programming and Control“; chapter 5,
“Switcher Software” and chapter 6, “HTML Operation“.
The Input button blinks, alternating between red and amber when video is
muted.
The input button blinks, alternating between green and amber when audio is
muted.
The input button blinks amber when both video and audio are muted.
