ATLAS 550 System Manual Section 7, ADTRAN Utilities
61200305L1-1F © 2002 ADTRAN, Inc. 393
Session Menu
Click on SESSION to open the Telnet session.
Connect
Opens dialog box for setting HOST NAME and
P
ORT parameters for a Telnet session. Also lets
you E
DIT ENTRY, ADD NEW entry, and DELETE
stored entries. When the parameters are set, click
C
ONNECT to make the connection. Click CANCEL
to end the session.
Host Name
Accepts and stores host names. You may either enter a descriptive name, an IP address, or a domain
name directly from this field. Click on the drop-down arrow to display a complete list of previously
stored host names.
P
ORT
Provides several port options. You may enter port numbers directly into this field to connect to
non-standard ports or select the drop-down combo-box to display the following options:
Edit Entry
Changes either the unit name or the IP address of each host.
Press
Tab, Return, or a period (.) after each number in the
IP address to move to the next field. If you press
Return or
(.)
while the cursor is located in each IP field, the next field
is cleared and the cursor advances into it.
Add New
Prompts you for the same information as the EDIT ENTRY
dialog box for new host. When enabled, the U
SE DNS (Domain Name Server) feature allows users to
request D
OMAIN LOOK UP via a DNS server on the network, rather than specifying an IP address. The
name then appears in the H
OST NAME field.
Delete
Removes a host name from the list; select the host name to remove, and click DELETE at the prompt.
Connect
Establishes the Telnet session.
TELNET establishes a Telnet session
E
CHO provides a loopback for troubleshooting
D
ISCARD bit bucket; discards data
D
AYTIME returns the time
C
HARGEN displays as a unique character stream; used for self-tests
