A SERVICE OF

logo

ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 163
MODULES (LEGACY-4) > INFO > PROCESSOR ID
Read security: 5
Displays the processor ID of the selected module.
MODULES (LEGACY-4) > SIGNAL STATUS
Read security: 5
Shows the status of key DTE interface signals. An asterisk (*) indicates the presence of a signal and a
hyphen (-) indicates no signal present.
MODULES (LEGACY-4) > SIGNAL STATUS > PORT
Read security: 5
Displays the operating port number. There are four available ports on the Legacy Data Option Module.
MODULES (LEGACY-4) > SIGNAL STATUS > DTE SIGNALS
Read security: 5
The following signals are monitored (these options are read-only):
MODULES (LEGACY-4) > PORT STATS
Write security: 5; Read security: 5
Shows statistics for each port of the Legacy Data Option Module including a frame count of transmitted
and received frames, errors, and async/sync statistics.
MODULES (LEGACY-4) > PORT STATS > PRT
Read security: 5
Displays the operating port number. There are four available ports on the Legacy Data Option Module.
MODULES (LEGACY-4) > PORT STATS > CLR
Write security: 3; Read security: 5
Clears all statistics for the selected port of the Legacy Data Option Module.
MODULES (LEGACY-4) > PORT STATS > FR IN
Read security: 5
(Frames In) Displays the total received frames since the last reset.
MODULES (LEGACY-4) > PORT STATS > FR OUT
Read security: 5
(Frames Out) Displays the total transmitted frames since the last reset.
DTR
Data terminal ready from DTE
DCD
Data carrier detect to DTE
DSR
Data set ready to DTE
CTS
Clear to send to DTE
RTS
Request to send from DTE