ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 235
DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > PORT
Write security: 3; Read security: 5
Specifies the port to use for the FROM connection. When you select this option, a list of ports and module
types appears. Select the appropriate port and module type, and press <Enter>.
DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > TO SLOT/SERVICE
Write security: 3; Read security: 5
Specifies the slot to use for the second end of a connection. Select this option, and a list of all of the slots
and the modules installed in the slots displays. Pick the appropriate slot and press <Enter>. A
PKTENDPT or
PKTVOICE endpoint may also be selected as the service for the connection.
DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > PORT/PEP
Write security: 3; Read security: 5
Specifies the port to use for the second end of a connection. When you select this option, a list of ports and
module types appears. Select the appropriate port and module type, and press <Enter>. If a
PKTENDPT or
PKTVOICE endpoint is selected for the TO SLOT/SERVICE field, the available packet endpoints or packet
voice endpoints will display in the drop down menu after pressing <Enter>.
DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > FROM CONFIG
Write security: 3; Read security: 5
Specifies the configuration for the FROM connection. The selections displayed in this field are based on the
type of module selected in the
FROM SLT option. For detailed information on submenus for a particular
module type, please refer to the
DEDICATED MAPS menu discussion for the appropriate network, option, or
resource module.
DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > TO CONFIG
Write security: 3; Read security: 5
Specifies the configuration for the TO connection. The selections displayed in this field are based on the
type of module selected in the
TO SLT option. For detailed information on submenus for a particular
module type, please refer to the
DEDICATED MAPS menu discussion for the appropriate network, option, or
resource module.
DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > SIG
Write security: 3; Read security: 5
Specifies whether the ATLAS 550 uses active Robbed-Bit Signaling (RBS) on the connection. Selecting
O
N allows the ATLAS 550 to preserve signaling bits between the two endpoints of the connection.
Selecting
OFF ignores the signaling bits of the connection. This selection is automatically set to OFF when
RBS does not apply. For example, a T1-to-Nx connection is set to
OFF.
DEDICATED MAPS > CREATE/EDIT MAPS > ACTIVATE TIME
Write security: 3; Read security: 5
Sets the time when the map becomes active if you have selected AUTO in the ACTIVATE MAP field. Enter this
time in hh:mm:ss 24-hour format.
