Filter
Top Products
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperWorkstation 7045A-
C3/7045A-CT. Installation and maintenance should be performed by experienced
technicians only.
The SuperWorkstation 7045A-C3/7045A-CT is a high-end server based on the
SC743TQ-865-SQ tower/4U rackmount chassis and the X7DCA-3/X7DCA-
i, a dual processor serverboard that supports dual Intel
®
Xeon
®
LGA771
5400/5300/5200/5100 series processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the serv-
er system and describes the main features of the X7DCA-3/X7DCA-i serverboard
and the SC743TQ-865-SQ chassis, which comprise the SuperWorkstation 7045A-
C3/7045A-CT.
Chapter 2: Server Installation
This chapter describes the steps necessary to setup the SuperWorkstation 7045A-
C3/7045A-CT into a rack and check out the server confi guration prior to powering
up the system. If your server was ordered without processor and memory compo-
nents, this chapter will refer you to the appropriate sections of the manual for their
installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.