Filter
Top Products
34
9921700000 Rev C mkt3048
Z. WHITMYER HEAD SUPPORTS
Attaching Head Support Mount (See Fig.1):
1. Remove back cushion and unsnap rear shell upholstery
exposing two head support mounting holes at center back
of inner seat shell.
2. Insert t-nuts (a) from inside of shell attaching headrest
mount (b) with supplied bolts (c).
3. Tighten securely
ATTACHING HEAD SUPPORT (SEE FIG.1):
1. Align slot in head support vertical bar with the attached
mount and assemble with height adjustment bolt (d) and
washer.
HEAD SUPPORT ADJUSTMENT (WHITMYER LIGHT
WEIGHT HEAD SUPPORT) (SEE FIG.2)
1. Height Adjustment: Bolt D (See Fig.1)
2. Anterior/Posterior & Horizontal Angle Adjustment: Bolts B
3. Pad tilt and angle adjustment: Collar bolts C (See Fig.4)
ATTACHING HEAD REST PAD (SEE FIG.4)
1. Remove vinyl collar cover and insert over the knurled
headrest ball.
2. Loosen collar bolts enough to slip collar onto knurled ball.
3. Evenly tighten collar bolts. Make sure collar alignment is
correct. (See Fig.4)
V I I . O P E R A T I N G I N S T R U C T I O N S
Figure 1
Figure 2
B
C
D
B
B
B
Figure 3
Figure 4
Incorrect Alignment
Correct Alignment
C
E
F
D