Sunrise Medical Xpress Stroller User Manual


 
20
9921700000 Rev C mkt3048
C1. TWO STAGE FOLDING
V I I . O P E R A T I N G I N S T R U C T I O N S
Figure 2
Figure 1
C3. FOLDING FRAME COMPLETE
The mobility system folds compactly with the shell installed. The system is designed to fold with the
seat shell installed in the forward facing position.
1. Engage wheel locks. Remove the child from the seat shell.
2. Elevate legrests, tilt seat to most forward position and fold the back forward. (See instructions on
pages 24 & 25)
3. Pull the fold lockout pin out. (See Fig. 10)
4. Activate the trigger (See Fig. 2)
5. Holding the triggers and handle, pull back on the frame in the direction shown (See Fig. 4)
6. Rear wheels will move forward and frame will collapse. As soon as the rear axel begins to move
forward begin to rotate the push handle forward at the same time (See Fig.4)
7. Attach fold retaining strap to underside of storage tray
8. Rotate upward or remove anti-tipper
C2. HANDLE ONLY FOLDING (See Fig.3)
NOTE: With the locking pin installed (See Fig.10)
1. Remove the child from the seating system
2. Handle storage will work with or without the shell in the Kid Kart
3. Engage the wheel locks
4. Activate the trigger handle as shown. (See Fig.2)
5. Rotate the handle forward and continue rotating the handle to it's folded position. (See Fig.3)
6. As handle moves forward, release the trigger and rotate the handle (See Fig.3)
Figure 3
Figure 4