23
mkt3048 9921700000 Rev C
V I I . O P E R A T I N G I N S T R U C T I O N S
Unfold the mobility base and be sure that the wheel locks
are engaged.
1. Place the shell over the top of the mobility base, and
squeeze the tilt-in-space (TIS) lever attached to the right
side of the shell handle. (See Fig.14 page 24)
2. Align the tilt-in-space guide pins and pivot posts with
the mobility base pivot slots and lower the shell into
place.
3. Adjust legrest, tilt and optional recline to appropriate
configuration.
G. POSITIONING SHELL REMOVAL
1. Engage wheel locks. Remove child from Kart. The push
handle must be in its normal use position to remove the
shell.
2. Squeeze and hold the TIS lever. (See Fig.14 page 24)
3. Lift the shell vertically from the mobility base.
Figure 14
Pivot Post
Guide Pin
Pivot
Slot