Filter
Top Products
SSC Series Central Chilling Stations Page 47 of 86
2. READY – Indicates that the compressor is enabled and ready
to run. However, the current loading does not require the
compressor to be running. This compressor will be
automatically started when needed.
3. RUNNING – Compressor is currently running.
4. FAULT – A safety on the compressor indicates a fault
condition and the compressor has been deactivated. Once the
problem is remedied, the compressor will return to a READY
state unless it is put in the OFFLINE state.
Operating the chiller compressors
To enable or disable the individual compressors, start at the Main
Menu, then:
n Press the or buttons on the right side of the screen
to highlight “CONFIGURATION MENU”
n Press the ↵ button
The configuration menu screen displays:
Chiller Configuration Screen
n Press the or button to highlight either “CIR 1 COMP
ENABLES” or “CIR 2 COMP ENABLES”
n Press the ↵