Filter
Top Products
SSC Series Central Chilling Stations Page 3 of 86
Safety Considerations
Sterling central chilling stations are designed to provide safe and
reliable operation when installed and operated within design
specifications, following national and local safety codes.
To avoid possible personnel injury or equipment damage when
installing, operating, or maintaining this equipment, use good
judgment and follow these safe practices:
þ Only PROPERLY TRAINED personnel familiar with the
information within this manual should work on this equipment.
þ Follow all local SAFETY CODES.
þ Wear SAFETY GLASSES and WORK GLOVES.
þ Disconnect and/or lock out power before servicing or
maintaining the chiller.
þ Use care when LOADING, UNLOADING, RIGGING, or
MOVING this equipment.
þ Operate this equipment within design specifications.
þ OPEN, TAG, and LOCK ALL DISCONNECTS before
working on equipment. Sterling recommends following OSHA
Lock-Out/Tag-Out Standard 29 CFR 1910.147.
þ Make sure the unit is properly GROUNDED before switching
power on.
þ When welding or brazing in or around this equipment, be sure
VENTILATION is ADEQUATE. PROTECT adjacent
materials from flame or sparks by shielding with sheet metal.
An approved FIRE EXTINGUISHER should be close at hand
and ready for use if needed.
þ Do not jump or bypass any electrical safety control.
þ Do not restore power until all tools, test equipment, etc. and
chiller and related equipment have been removed.