Filter
Top Products
3–Pump 33-Station Controllers Chapter 4: Operation 29 of 51
4. When you are finished reviewing the information, touch Return. The “Help Menu”
screen opens.
5. Touch Menu to return to the “Menu” screen.
The following table explains the status represented by each color at the “Station Status”
screen.
Color Label Description
Gray outline Offline Station is not enabled. The controller ignores any demands or
alarms.
Blue Ready Station is enabled and idle (full).
Yellow Demand Station requires material.
Green Loading Station is being loaded with material.
Light blue Dumping Station is dumping material into its receiver.
Green, blinking Priority Station is in priority convey mode. Its pump will be temporarily
dedicated to filling it as soon as possible.
Red, blinking Alarm Station is in alarm.
Red outline, blinking Critical Station is in critical alarm. The controller has disabled the station
until the alarm is cleared.
Additional basic information about each station (convey time, dump delay, and pump
assignment) is available at the “Station Operator” screen. See page 33 for details.
Detailed configuration settings for each station are available at the “Station Setup” screen.
See page 42 for details about each of these settings.