Filter
Top Products
6
Part No. and Description Qty
88 Bolt, Button Head (M8 x 1.25 x 35mm) 12
89 Bolt, Button Head (M8 x 1.25 x 42mm) 2
99 Screw, Flat Head (M4.5 x 15mm) 8
93 Bolt, Flat Head (M6 x 1 x 15mm) 2
94 Bolt, Flat Head (M8 x 1.25 x 15mm) 2
103 Nylock Nut (M8 x 1.25) 4
104 Washer (M8) 4
24 Pivot Bolt 2
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers, the
end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the
length of the bolts and screws.
NOTICE: The bolt length is measured from the bottom of the head of the
bolt to the end of the bolt. The head of the bolt is not included in
the measurement unless the it is a flat head screw or bolt.
mm.
in.
INCHES
MILLIMETERS
11/2021/2 31/2 41/2 51/2 61/2
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
6 8 10 12
3/16" 5/16" 1/2"3/8"1/4"
length
length
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
84 Bolt, Button Head (M6 x 1 x 82mm) 6
85 Bolt, Button Head (M8 x 1.25 x 15mm) 24
86 Bolt, Button Head (M8 x 1.25 x 25mm) 8