Filter
Top Products
ASSEMBLY INSTRUCTIONS
11
The UPRIGHT TUBES(34) must be installed with the adjustment holes (not shown) facing away
from the AeroPilates Pro XP686.
NOTE:
STEP 9
Attach the REAR WOODEN PLATFORM(33) to the REAR FRAME(29) with BUTTON HEAD BOLTS
(M8x1.25x35mm)(88) from the top and FLAT HEAD SCREWS(M4.5x15mm)(99) from the bottom.
STEP 10
Insert the UPRIGHT TUBES(34) into the REAR FRAME(29) with the series of adjustment holes in the
UPRIGHT TUBES(34) facing toward the back and secure with BUTTON HEAD BOLTS(M8x1.25x35mm)
(88).
STEP 11
Attach the HANDRAIL(30) to the REAR FRAME(29) with FLAT HEAD BOLTS(M6x1x15mm)(93) and
FLAT HEAD BOLTS(M8x1.25x15mm)(94).
STEP 12
Attach the REAR WOODEN COVER(31) to the REAR FRAME(29) with BUTTON HEAD BOLTS
(M8x1.25x25mm)(86). Press the LEFT and RIGHT RAIL CAPS(11, 12) into the LEFT and RIGHT RAILS
(9, 10).