Filter
Top Products
ASSEMBLY INSTRUCTIONS
10
STEP 7
Attach the WHEELS(8) to the FRONT FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x42mm)(89),
WASHERS(M8)(104), and NYLOCK NUTS(M8x1.25)(103).
STEP 8
Refer to the illustration. Set the BUMPER SLIDER(17) in the RIGHT GEAR GUIDE(15) to the rear-most
position. Set the BUMPER SLIDER(17) in the LEFT GEAR GUIDE(14) to the front-most position.
Make the screws attaching the SLEEVES(72) to the SPRING BAR(71) face down. Insert the left end of the
SPRING BAR(71) into the slot in the left BUMPER SLIDER(17) and insert the right end of the SPRING
BAR(71) into the slot in the right BUMPER SLIDER(17). The SPRING BAR(71) must be at an angle to do
this. After both ends of the SPRING BAR(71) are in the slots in the BUMPER SLIDERS(17), align the
SPRING BAR(71) so that it is perpendicular to both RAILS(9, 10).