Filter
Top Products
Configuring the V2IU 4350
3 - 65
4. Select the Apply Route checkbox.
5. Enter the IP Network address. This address is the remote data network
you would like the 4350 to forward to the gateway. The hosts portion of
the IP address should be set to “0”. For example, 10.10.20.0
6. Enter the Netmask of the remote data network. For example,
255.255.255.0
7. Enter the Gateway IP address of the interface that will receive all packets
destined for the remote data network.
8. Press Submit.
Delete the static route
1. Select System.
2. Select System Overview.
3. Select Route.
4. Remove the check in the Apply Route checkbox.
5. Press Submit.
Firewall Configuration