Oricom 610 Baby Monitor User Manual


  Open as PDF
of 48
 
24
The Parent unit menu
The button on the Parent unit can be used to select and change settings on the
"ABYUNITWITHOUTHAVINGTORISKDISTURBINGYOURBABY9OUCANACCESSTHESETTINGSBY
1. Press then press or to scroll through the menu options shown on
the top of the display. Press when the option you want is displayed.
4HElRSTSUBMENUOPTIONWILLBEDISPLAYEDPRESS
to scroll through the
options. The (
arrows) indicate when you can scroll either up or down. Press
when the option you want is displayed.
3. To exit the menu at any time, press BRIEmYANDSTEPBACKONEMENULEVEL
at a time, or press and hold
to return to the idle screen. If no buttons are
pressed for 10 seconds whilst accessing the menu, the display will return to idle
ANDANYUNSAVEDCHANGESWILLBELOST
Lightshow
4HE"ABYUNITHASA,IGHTSHOWFEATURETHATPROJECTSASTARRYIMAGEONTOTHECEILING
OFYOURBABYSROOM4HEREAREBRIGHTNESSLEVELSTOCHOOSEFROMANDYOUCANSET
a period of time for the Lightshow to illuminate using the Parent unit menu.
The Baby unit must be switched on for the Lightshow to work but need not be linked to the Parent unit.
Switch lightshow on/off using the Baby unit
1. To switch on, press the BUTTON4HEBRIGHTNESSLEVELANDPERIODOFTIMEFOR
the lightshow to illuminate for will be as last set using the Parent unit.
2. To switch off, press the button.
USING YOUR DIGITAL BABY MONITOR
 previous next