Filter
Top Products
SSR Series Modules and Backplanes 18
©
National Instruments Corporation
561 Hillgrove Avenue • LaGrange, Illinois 60525 • USA • Phone: (708) 354-1040 • Fax: (708) 354-2820 • http://www.grayhill.com
An ISO-9001 Company
SPECIFICATIONS–All Modules
Output Specifications
Output Current Range: 1-50 mA
Breakdown Voltage: 50 Vdc minimum
Off State Leakage Current: 1 µA maximum
On State Voltage Drop: 0.45 Vdc at 50 mA
maximum
Storage Temperature Range:
-40˚C to +125˚C
Operating Temperature Range:
-40˚C to +100˚C
General Characteristics
Insulation Resistance (Input to Output;
Input or Output to Case): ≥ 10
10
Ohms
Dielectric Strength Input to Output:
4000 Vac (rms) minimum
Input to Output Capacitance: 6 pF typical
Vibration: 20 G?s peak or .06" double amplitude
10–2000 Hz per MIL–STD–202, Method 204,
Condition D
Mechanical Shock: 1500 G?s 0.5 mS half-sine
per MIL–STD–202, Method 213, Condition F
Materials and Finishes
Terminals: Copper wire, tin plated
Case: Solvent resistant thermoplastic; meets
UL94V–0
Potting: High thermal conductive epoxy
UL Recognition & CSA Certification
UL file number E58632 and CSA file number
LR38763 apply to all modules shown here,
except 70-IDC5B and 70M-IDC5NP.
Specifications apply over operating temperature range unless noted otherwise.
Grayhill Part Number
SPECIFICATIONS–By Part Number (DC Input Only)
Type/Function
G5, Non-Polarized 70G-IDC5G 70G-IDC5NP 70G-IDC15NP 70G-IDC24NP
Miniature, Non-Polarized 70M-IDC5G 70M-IDC5NP
Standard, Non-Polarized 70-IDC5G 70-IDC-5NP 70-IDC15NP 70-IDC24NP
Specifications Units
Maximum Input Voltage Vac/Vdc 60 32 28 32
Input Voltage Range* Vac/Vdc 35-60 15-32/10-32 15-32/10-32 15-32/10-32
Input Current at Max. Input Voltage mA 6 25 25 25
Maximum Turn-on Time mSec 10 5 5 5
Maximum Turn-off Time mSec 10 5 5 5
Nominal Input Resistance (Rx) Ω 10K 1.8K 1.8K 1.8K
Max. Pick Up Voltage (Output Low) Vac/Vdc 35 15/10 15/10 15/10
Min. Drop Out Voltage (Output High) Vac/Vdc 9333
Nominal Logic Voltage (Vcc) Vdc 5 5 15 24
Logic Voltage Range: Std & Mini Vdc 3-6 3-6 8-18 15-30
G5 Vdc 4.5-6 4.5-6 10-18 17-30
Max. Logic Supply Current mA 10 10 10 10
@ Nominal Vcc (See Figure 1 or 2)
Grayhill Part Number
SPECIFICATIONS–By Part Number (AC or DC Input)
Type/Function
* For input voltages in the range of 90 to 140 Vdc, use AC input modules 70-IAC5, 70M-IAC5
or 70G-IAC5. For input voltages in the range of 180 to 280 Vdc, use AC input modules 70-IAC5A,
70M-IAC5A or 70G-IAC5A.
Available from your local Grayhill Distributors
For prices and discounts, contact a local Sales
Office, an authorized local Distributor, or Grayhill.
DC INPUT MODULE
41
G5, Polarized 70G-IDC5 70G-IDC5B 70G-IDC5D 70G-IDC5K 70G-IDC15 70G-IDC24
Miniature, Polarized 70M-IDC5 70M-IDC15 70M-IDC24
Standard, Polarized 70-IDC5 70-IDC5B 70-IDC15 70-IDC24
Specifications Units
Maximum Input Voltage Vdc 32 32 28 16 32 32
Input Voltage Range* Vdc 3-32 3-32 2.5-28 2.5-16 3-32 3-32
Input Current at Max. Input Voltage mA 18 18 23 30 18 18
Maximum Turn-on Time mSec 0.20 0.050 0.050 0.025 0.20 0.20
Maximum Turn-off Time mSec 0.40 0.075 0.075 0.025 0.40 0.40
Nominal Input Resistance (Rx) Ω 1.8K 1.8K 1.2K 500 1.8K 1.8K
Max. Pick Up Voltage (Output Low) Vdc 3 3 2.5 2.5 3 3
Min. Drop Out Voltage (Output High) Vdc 1 1 1 1 1 1
Nominal Logic Voltage (Vcc) Vdc 5 5 5 5 15 24
Logic Voltage Range: Std & Mini Vdc 3-6 3-6 8-18 15-30
G5 Vdc 4.5-6 4.5-6 4.5-6 4.5-6 10-18 17-30
Max. Logic Supply Current mA 10 18 10 18 10 10
@ Nominal Vcc (See Figure 1 or 2)