Filter
Top Products
invision Serial/Modem Charging Cradle User Guide
Operating the Cradle
The Sync Select switch on the back of the PS6S1800M cradle can be set in either of two
positions:
MODEM
Move the switch to the
left-hand position for
modem communications.
While in this position, the
cradle automatically
wakes up the SPT
terminal (if it is asleep),
initializes the modem
electronics, and performs
a modem HotSync
when the HotSync
button is pressed. You
will be able to hear the
modem working while it
is dialing and making the
HotSync connection.
MODEM SERIAL
SERIAL
Move the switch to the
right-hand position for serial
communications.
While in this position, the
cradle automatically wakes
the SPT terminal (if it is
asleep) and performs a
serial HotSync when
the HotSync button
is pressed.
If the terminal has been previously configured for these HotSync activities, there
is nothing left to do but “Push the HotSync button - .
In order to properly perform a HotSync, the SPT terminal, computer,
and/or remote location must be correctly configured, and the cradle and
phone line or serial cable must be plugged in as previously described.
See the Product Reference Guide provided by the terminal manufacturer
for more information on configuring the SPT terminal, computer, or
remote location for HotSync operations.
5
Mobility Electronics, Inc