Filter
Top Products
invision Serial/Modem Charging Cradle User Guide
Setting up the PS6S1800M
Setting up your PS6S1800M is easy and includes only these simple steps.
1. Power Connection
2. HotSync Connection:
a. Connect the serial cable to the computer (if you want to HotSync with the
computer), or
b. Connect the modem (if you want to HotSync with a remote location via
the modem)
Power Connection
To connect your PS6S1800M to your computer:
Connect your Symbol’s power
adapter into a US
standard 110V wall
outlet.
Connect the barrel
end of the power
adapter into the
9VDC jack on the
rear of the cradle.
The PS6S1800M cradle is compatible with the power adapter used by your
Symbol 1700 or 1800 terminal. If replacing the power adapter, US users may
use the Mobility Power Adapter PN 170182-002, a universal “auto-switching”
power adapter. This product ships with a detachable US Standard 110V power
cord that might be changed to match other power receptacles, if you have a
different power requirement. You might also use a power cord converter to
allow the power adapter to plug into other power receptacles. If you have any
other questions, contact Mobility.
HotSync Connection
Before you prepare the PS6S1800M cradle for HotSync communications, you must decide
which type of HotSync communication you desire. (1) HotSync with the computer, or (2)
HotSync with a remote location.
2
Mobility Electronics, Inc