Filter
Top Products
invision Serial/Modem Charging Cradle User Guide
HotSync with the Computer
To HotSync your terminal
with data on your
computer, follow these
simple steps:
Plug the RJ-45
connector into the
Serial Jack on rear of
the PS6S1800M cradle.
Turn off your computer
and plug the DB-9
connector into the serial
communications port on your
computer.
Change the Modem/Serial Switch to
the “Serial” position.
Your PS6S1800M requires
a dedicated port. It cannot
share a port with an
internal modem or other
device.
If you are unsure about
the location of the serial
port on your computer,
refer to the user's manual
supplied with the
computer.
3
Mobility Electronics, Inc