Filter
Top Products
Black plate (31,1)
Seat Belt Warning Light/Beep
The seat belt warning light illuminates
and a beep sound will be heard if the
driver's seat belt is not fastened when the
ignition is switched ON.
Conditions of operation
Condition Result
The driver's seat belt is not
fastened when the ignition is
switched ON.
The warning light
flashes and a beep
sound will be heard
for about 6 seconds.
The driver's seat belt is
fastened while the warning
light and the beep soundare
activated.
The warning light
turns off and thebeep
sound stops.
The driver's seat belt is
fastened before the ignition
is switched ON.
The warning light will
not illuminate and the
beep sound will not be
heard.
qBelt Minder
NOTE
Consult an Authorized Mazda Dealer to
deactivate or restore the belt minder. Though
the belt minder can be deactivated, doing so
will defeat the purpose of the system to warn
the driver and the front passenger in the event
that their seat belts are not fastened. For the
safety of the driver and front passenger, Mazda
recommends not deactivating the belt minder.
Driver's seat
If the driver's seat belt is not fastened and
the vehicle is driven at a speed faster than
about 20 km/h (12 mph), the warning
light will flash and a beep sound will be
heard.
Once the beep sound is heard, it continues
sounding even if the vehicle speed lowers
to 20 km/h (12 mph) or less until the seat
belt is fastened or the beep sound period
has passed.
Front passenger seat
If the front passenger seat belt is not
fastened while the ignition is switched
ON, the driver and the passen ger will be
informed by the warning light.
Essential SafetyEquipment
Seat Belt Systems
2-19
Mazda2_8BL3-EA-10E_Edition3 Page31
Wednesday, September 29 2010 3:52 PM
Form No.8BL3-EA-10E