Filter
Top Products
Black plate (123,1)
qActivation/Deactivation
To activate the system, press the ON
switch.
To deactivate the system, press the OFF
switch.
WARNING
Always turn off the cruise control
system when it is not in use:
Leaving the cruise control system in
an activation-ready state while the
cruise control is not in use is
dangerous as the cruise control could
unexpectedly activate if the
activation button is accidentally
pressed, and result in loss of vehicle
control and an accident.
qTo Set Speed
1. Activate the cruise control system by
pressing the ON switch.
2. Accelerate to the desired speed, which
must be more than 30 km/h (19 mph).
3. Set the cruise control by pressing the
cruise control SET
/SET- switch up
or down at the desired speed. The
cruise control is set at the moment the
cruise control SET
/SET- switch is
pressed up or down. Release the
accelerator pedal simultaneously.
NOTE
l
Release the cruise control switch at the
desired speed, otherwise the speed will
continue increasing while the switch is
pressed up, and continue decreasing while
it is pressed down (except when the
accelerator pedal is depressed).
l
On a steep grade, the vehicle may
momentarily slow down while ascending,
or speed up while descending.
l
Cruise control will turn off if the vehicle
speed decreases below 25 km/h (16 mph)
when cruise is activated, such as when
climbing a steep grade.
Driving YourMazda
Starting and Driving
5-17
Mazda2_8BL3-EA-10E_Edition3 Page123
Wednesday, September 29 2010 3:52 PM
Form No.8BL3-EA-10E