Filter
Top Products
Black plate (19,1)
1. Verify that the seat belt is secured in
the belt clip.
Belt clip
2. Lift the seatbacks upright.
3. Make sure that the seat belt is neither
stuck in the rear seat nor twisted, then
remove the seat belt from the belt clip.
Head Restraints
Your vehicle is equipped with head
restraints on all outboard seats. The head
restraints are intended to help protect you
and the passengers from neck injury.
WARNING
Always drive with the head restraints
installed when seats are being used
and make sure they are properly
adjusted:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
Height adjustment
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stop-
catch release, then push the head restraint
down.
Adjust the head restraint so that the top is
even with the top of the passenger's ears,
never the passenger's neck to prevent
injury.
Front outboard seat
Essential SafetyEquipment
Seats
2-7
Mazda2_8BL3-EA-10E_Edition3 Page19
Wednesday, September 29 2010 3:52 PM
Form No.8BL3-EA-10E