Filter
Top Products
Black plate (128,1)
qDSC OFF Indicator Light
This indicator light stays on for a few
seconds when the ignition is switched
ON.
It also illuminates when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-22).
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
qDSC OFF Switch
Press the DSC OFF switch to turn off the
TCS/DSC. The DSC OFF indicator light
will illuminate.
Press the switch again to turn the TCS/
DSC back on. The DSC OFF indicator
light will go out.
NOTE
l
When DSC is on and you attempt to free the
vehicle when it is stuck, or drive it out of
freshly fallen snow, the TCS (part of the
DSC system) will activate. Depressing the
accelerator will not increase engine power
and freeing the vehicle may be difficult.
When this happens, turn off the TCS/DSC.
l
If the TCS/DSC is off when the engine is
turned off, it automatically activates when
the ignition is switched ON.
l
Leaving the TCS/DSC on will provide the
best stability.
5-22
Driving YourMazda
Starting and Driving
Mazda2_8BL3-EA-10E_Edition3 Page128
Wednesday, September 29 2010 3:52 PM
Form No.8BL3-EA-10E