Filter
Top Products
52 53
5. Once back support is separated , store
back support with all the harness straps, head
support, body support and crotch pad cover in
safe place.
6. Reattach the elastic straps at the back of the
seat
and through the vehicle belt guide on
the sides of seat as shown.
7. Seat is ready to install.
To reattach back support if needed, reverse steps
from p. 53 to p. 51.
3. Pull the seat pad out of the way to reveal
red buttons as shown in . Slide the buttons
to release the back support from the base and
lower it into a flat position.
When removing back support, you must
support the back support when sliding the red
buttons that disengage the back support from
the base. Make sure all hands, fingers and
other objects are not behind the back support
when removing it.
4. Move seat pad fabric out of the way and
squeeze red buttons together to release back
support from seat. Pull seat and back support
apart .