Filter
Top Products
44 45
12. Tuck seat pad in between the gap of the
back support and seat area of the booster seat
to allow 2 elastic straps to show at the rear of
the seat.
13. Attach 2 seat pad elastic straps onto the
hooks on the rear of the child restraint as
shown in .
14. Pull elastic strap on the seat pad through
the vehicle belt guide on side of seat and
attach to hook as shown.
Repeat on other side .
Reverse instructions to reinstall harness.
See Section 10.0, page 29-31 for the correct
path for the harness.
10. Remove harness straps from arms as
shown in ¢.
Store the body support, harness covers, crotch
pad cover and harness straps
in safe place for future use.
11. Move seat pad fabric out of the way then
raise seat back so that both arms LOCK into
the gutters .
You should hear a CLICK when the arms lock
into the gutters.
MAKE sure to keep the gutters clear of any
obstructions.
KEEP
GUTTERS CLEAR
¢
Arm
Harness Strap
T-slot