Filter
Top Products
50 51
To use booster seat WITHOUT back
support, remove harness straps if attached
(see section 15.0 Harness Removal, p.41-45)
then continue with the following steps:
1. Detach 2 lower elastic straps from rear of
seat as shown .
2. Detach elastic strap from the hooks on the
seat pad as shown. Repeat on other side .
19.0 Removing Back Support
18.0 Adjusting Head Support in Booster Mode
BEFORE adjusting the head support height,
have your child lean forward slightly.
Squeeze the red adjustment handle
on
top of seat and pull back support up until it
snaps into one of the 5 height positions .
To lower, squeeze red adjustment handle
and push down.
CHECK to make sure it is securely snapped
into one of the 5 height positions by pulling
up on head support.
The shoulder belt guides must be even with
or just above the shoulders as shown by
dotted line
.