Filter
Top Products
6050-065-L-11-08
1
UL325 Class of Operation Model 6050 Class I Only ; Model 6100 Class I, II, III, IV
Type of Gate Vehicular Swing Gates Only
Horsepower 1/2 HP
Voltage / Phase 115 VAC Single-Phase
Current Model 6050 1/2 HP – 4.3 Amps @ 120V ; Model 6100 1/2 HP – 5.4 Amps @ 120V
Max Gate Weight Model 6050 - 400 Lbs. ; Model 6100 - 500 Lbs.
Max Gate Length Model 6050 - 10 Ft. ; Model 6100 - 14 Ft.
Cycles Per Hour Model 6050 - 10 Per Hour ; Model 6100 - 60 Per Hour
Speed 90° in approximately 12 seconds
Entrapment Protection Primary - Inherent adjustable clutch (Type C)
Secondary - Inherent entrapment sensing system (Type A) and provision
for connection of a non-contact sensor (Type B1)
6050 / 6100 SPECIFICATIONS
Use this manual with the following models only:
6050-080, 6050-081, 6100-080, 6100-081, 6100-082*, 6100-083*.
*Optional Convenience Open System
DoorKing, Inc. reserves the right to make changes in the products described in this manual without notice and without obligation of DoorKing, Inc. to notify any
persons of any such revisions or changes. Additionally, DoorKing, Inc. makes no representations or warranties with respect to this manual. This manual is
copyrighted, all rights reserved. No portion of this manual may be copied, reproduced, translated, or reduced to any electronic medium without prior written
consent from DoorKing, Inc.
This manual is for operators
manufactured after June 30, 2008.
11”
27.75” with Convenience Open
23” Standard
Post Mount Kit
P/N 2600-674
Pad Mount Kit
P/N 2600-671
Dimensions are the same
for the operator housings.
Arm Assembly
Arm Assembly
Distance can vary.
6” minimum.
10.5”
13.5”
6.75”
6.25” 7.25”
6.75”
2.25”
18”
6”
3”
3”
11”
Note: 6100’s with Convenience Open:
Output shaft is offset 1” from center.
9.5”