Filter
Top Products
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switches: M8024-k, 8024, and 8024F
43
Also notice that the switch still has the same Current-Active image as before.
8. Under the Next-Active column, select the new image (i.e. image2) for the switch or stack.
9. Click Apply.
The Current-Active column should now show the opposite values as what is in the Next-Active
column. A reload is required to active the firmware.
10. Select System > General > Reset. Choose “All” in the Switch ID menu.
11. Click Apply.
12. After the stack resets, verify the new firmware has become active.
13. Select System > File Management > Active Images again.