Filter
Top Products
14
15
LATCH REMOVAL & STORAGE SHOULDER BELT LOCKOFF
Removing LATCH:
1
Pull LATCH Connectors out of
storage pockets while lifting up on
LATCH Release Lever.
Storing LATCH:
2
Insert LATCH Connectors into
storage pockets.
3
Pull LATCH Pull Strap to
secure LATCH Connectors.
4
Roll LATCH Pull Strap and
store in Pull Strap Storage Pocket.
1
Do not put the shoulder belt
in the locked mode.
2
With vehicle belt tight, position
the shoulder belt under the
Shoulder Belt Lockoff that is on the
opposite side of the buckle.
3
Firmly slide shoulder belt
under the lockoff. (Optional: Once
the base is installed tightly, the
shoulder belt can be put in the
locked mode. See vehicle owner’s
manual or label on seat belt for
more information.)
This Child Restraint can be safely installed using vehicle
belts or LATCH. LATCH is a Child Restraint attachment
system that is standard in most vehicles manufactured
after September 1, 2002. Refer to your vehicle owner’s
manual for details regarding LATCH use in your vehicle.
When not using LATCH, the LATCH Connectors and Pull
Strap MUST be stored properly to allow Carrier to attach
securely to Base.
2
3
4
1
2
The Shoulder Belt Lockoff is used when installing the Base using
your vehicle belts. It locks the vehicle shoulder belt in place,
ensuring a stable, secure Base installation.
Refer to “Installation Using
Vehicle Belt” on page 32 for
detailed installation instructions.
3
1