Filter
Top Products
22
23
Use head support to provide
additional support for a young
infants head.
a
Head support can be used
with or without newborn insert.
b
To Install Head Support, pull
Fastener Tabs through slots and
then attach together on underside
of carrier.
a
NEVER use head support with harness in upper slots.
Head support could interfere with harness adjustment.
b
HEAD SUPPORT
1
To secure carrier to base,
align carrier with base and push
firmly into base. Listen for a click.
2
To release carrier from base,
pull release handle while lifting
carrier out of base.
CARRIER/BASE ATTACHMENT
Fastener Tabs must always
connect through slots ABOVE
the slots used for harness.
Pull up on Carrier to verify that
it is securely latched.
Be sure to hold carrier securely
with both hands when removing.
1
2