Filter
Top Products
38
39
1
Position Carrier rear facing
in aircraft seat, with child properly
secured in Carrier.
2
Route Aircraft Lap Belt under
both Belt Guides, and fasten the
aircraft belt.
3
Tighten Aircraft Lap Belt
while pushing Carrier firmly into
aircraft seat.
A tightly rolled airline blanket may be
used under the front edge of the Carrier
if needed for stable, secure installation.
4
Check Installation:
a
Level Line on Carrier MUST
be LEVEL with ground.
b
Aircraft belt MUST be TIGHT.
c
Carrier MUST be STABLE
and secure.
INSTALLATION IN AIRCRAFT
Removing the Seat Pad
Remove Harness Straps from
Harness Slots as described in
“Changing Harness Height.”
1
Unhook elastic band attached
around handle pivots, and
disconnect chest clip and buckle.
2
Carefully pull seat pad from
under Adjuster Cover.
ADJUSTER
COVER MUST REMAIN IN PLACE
.
Guide harness assembly through
slots in bottom of seat pad, while
removing from Carrier.
Installing the Seat Pad
Reverse the removal instructions to
reinstall the Seat Pad.
Carefully follow instructions in
“Changing Harness Height” to ensure
the harness is properly routed and
adjusted.
CLEANING & MAINTENANCE
Fabrics may be spot-cleaned with mild soap and water, or
machine washed in cold water on delicate cycle using mild
detergent. Hang to dry. DO NOT USE BLEACH.
1
2
This Child Restraint is certified for use in commercial aircraft.
Be sure to contact your airline prior to travel, to discuss their
Child Restraint policy.
a
b
2
3
NEVER use Carrier
without the Seat Pad.
4