Filter
Top Products
Operating Instructions
COLORado™ 3P User Manual 31 3/17/2009 9:54 AM
generally used when you add more units to an existing system. Turning off and then on the controller
has the same effect.
[Reset to factory settings]
This function will reset all the settings to the factory defaults except for [Custom] programs.
Factory Default Settings
Setting
Default
[Schedule]
All times in schedule are reset to [00:00]
[Wash program]
Step times and fade times are reset to [001]
[Effect program]
Speeds are reset to [001]
[DMX address]
DMX address is reset to [001]
[Range]
Range is reset to [066]
[Allow edit]
Reset to [Yes]
[Password ON/OFF]
Password is reset to [OFF]
[Set password]
Password is reset to [00000000] Down=0, Up=1
Activating password mode
Set [Password] function to [ON]. This will prompt the user for a password every time the
controller is powered on.
Toggle to [Set password] function in order to change the password.
Input an 8 digit password using the [UP] & [DOWN] keys. Press the [SET] button to confirm.
Note In the event that the user forgets the password use the following factory
password override:
[UP] [DOWN] [UP] [DOWN] [UP] [UP] [DOWN] [DOWN]
Control via external DMX
Programs in the controller can be accessed via an external DMX controller. It will be necessary to
have the DMX address set on the COLORado Controller. The controller operates on 4 channels of
control.
DMX Channel Values
CHANNEL
VALUE
FUNCTION
1
000 010
011 030
031 040
041 060
061 070
071 090
091 100
101 120
121 130
131 150
151 160
161 180
181 190
191 210
211 220
221 255
Blackout
Wash [1]
Blackout
Wash [2]
Blackout
Wash [3]
Blackout
Wash [4]
Blackout
Wash [5]
Blackout
Wash [6]
Blackout
Wash [7]
Blackout
Wash [8]
2
000 010
011 030
031 040
041 060
061 070
071 090
091 100
101 120
Blackout
Effect [1]
Blackout
Effect [2]
Blackout
Effect [3]
Blackout
Effect [4]