Filter
Top Products
Setup
COLORado™ 3P User Manual 13 3/17/2009 9:54 AM
This drawing provides a
general illustration of the
DMX Input/Output panel
of a lighting fixture.
Universal DMX Controller
Continue the link
Setting up a DMX Serial Data Link
Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector
of the controller.
Connect the end of the cable coming from
the controller which will have a (female) 3
pin connector to the input connector of
the next fixture consisting of a (male) 3
pin connector.
Then, proceed to connect from the output
as stated above to the input of the
following fixture and so on.
CHAUVET Certified DMX Data Cables
Order Code Description
DMX1.5 DMX Cable 1.5m/4.9ft
DMX4.5 DMX Cable 4.5m/14.8ft
DMX10 DMX Cable 10m/32.8ft