Filter
Top Products
Operating Instructions
COLORado™ 3P User Manual 18 3/17/2009 9:54 AM
Menu Map
MAIN FUNCTION
SUB-FUNCTION
SELECTION
INSTRUCTION
Static color
Red
000 ~ 255*
(0 ~ 100%)
*Strobe range
is 0 ~ 20 (000
~ 255)
User can combine Red, Green and Blue
to generate a custom color
Select intensity over pre-composed
colors yellow, cyan, purple and white
Select strobing frequency between 0
and 20Hz
Green
Blue
Yellow
Cyan
Purple
White
Strobe
DMX512 address
001 ~ 512
Sets the DMX starting address
Personality
STAGE 1
STAGE 2
PIXEL
RGB for each module
ARC 1
RBG
ARC+D
RGB + D
Run Mode
DMX
To operate with DMX control
CON
To operate with the COLOr-CON
Auto program
1
Choose from 8 Automatic run programs
2
3
4
5
6
7
8
Settings
ID address
01 ~ 66
Assigns the ID address to a fixture
ID ON/OFF
On ~ Off
Either enables or disables ID addressing
ADAS faders no
01 ~ 244
Sets the number of ADAS channels for use
when automating DMX channel assignment
ADAS ON/OFF
On ~ Off
Enables the Automatic DMX512
Addressing System
ADAS copy
On ~ Off
When activated the DMX512 address
assigned by the ADAS will become
permanent on the fixture
Factory settings
Reset confirm
Resets fixture to factory default settings
Dimmer start
001 or 005
Password
ON/OFF
On ~ Off
When password is set to on the control
panel will ask for a password each time the
control panel is accessed
Set Password
[????????]
Use UP and DOWN buttons to set and
press SET to confirm
Note! If you forget the password use the
following factory password:
UP, DOWN, UP, DOWN, UP, UP, DOWN,
DOWN
Manual Power ON/OFF
The COLORado™ can be turned on and off using the control panel.
POWER
ACTION
Turn OFF
When {MENU} is displayed in the LCD panel, hold down the (EXIT) button for 3
seconds to turn off the fixture.
Turn ON
Hold the {EXIT} button for 3 seconds to turn power on.