Filter
Top Products
Operating Instructions
COLORado™ 3P User Manual 25 3/17/2009 9:54 AM
Important Notes about Stage 2 Mode 1
Red, Green and Blue Selection
Channels 2, 3 and 4 control overall intensity of each respective color.
Channels 2, 3 and 4 can be combined to create an unlimited range of colors.
Strobe
Strobe occurs at every channel with the exception of Channels 7 and 10.
Speed of the strobe is adjustable from 0 to 20 Hz.
Mode Selection
Channel 9 values 5-244 provides mode selection and can only be activated while
Channels 1 through 7 are at value 0. When channel 9 is between 245 and 255, channels
1 through 7 can be any value.
When Color-Cycle mode 4 is selected channel 9 controls the speed.
ID address selection
Use channel 8 to select ID addressed fixtures.
Each independent DMX address can have up to 66 ID addressed fixtures.
ID address “0” allows control of all fixtures simultaneously.
Module selection
Provides individual control of the three LED modules in each fixture.
Channel 9 has priority over channel 10.
Effect macro
These are pre-programmed color patterns and module chases.
Channel 10 has priority over channels (1, 2, 3, 4).
Channel 10 has priority over channel 9 if first activated.