Filter
Top Products
COLORado™ 3 User Manual 28 2009-03-17/09:54
LCD Display Panel
MODE Accesses main menu or backs out of sub-menu
SETUP Selects the currently displayed menu or confirms the current function value
UP Use to navigate upwards through menu items or increment function values
DOWN Use to navigate downwards through menu items or decrement function values
MODE SETUP UP DOWN
Sold
Separately
5. COLORado™ Controller
Overview
Setup
Connect from the OUT on the controller to the DMX Input side of the COLORado™ using a DMX
XLR cable. Visit the section titled: Setting up a DMX Serial Data Link on Page 13.
It is recommended that you power up all COLORado units connected prior to turning on the
controller. This ensures that the controller will auto-detect DMX addresses.
Alternatively you can use {Detect device} from the {Settings} menu.
Set ID addresses on the COLORados in ascending order.
Set the {Range} in the {Settings} menu.
Note There is no need to set ID and Range for {Wash} programs.